Apple iPad Air 2019 - Air 3rd Gen - Pro 10.5 Actieve houder met 12V USB plug

Active holder with cig-plug With USB-cable with cig-plug adapter. Apple approved charging cable. With tilt swivel Use an active holder for your iPad while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation -safe and convenient. The holder is equipped with an apple approved USB-cable with cig-plug adapter. You can choose to connect the cig-plug to the car's 12 Volt socket, or to remove the cig-plug adapter and connect the USB cable to the car's (or stereo's) USB connector. Length of charging cable: 132 cm, inlc cigg-plugg Important note! In order to be able to transmit audio files from your device through the USB-cable, this feature must be supported by the stereo in your car. You can easily test if this works by connecting your device to the stereo with the USB/charging cable that comes with your device. Charging through USB works regardless. The holder is mounted onto a tilt swivel so you can adjust the angle and switch between portrait and landscape mode. Tablets should not be installed onto a carâs dashboard if they block the view or block key controls. The ProClip is designed for installation of smaller devices (phones), not for large devices (tablets). If you want to place a tablet onto the carâs dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations. An installation of a tablet onto a vehicleâs dashboard is always done on the customerâs own responsibility. Brodit recommends to use tablets on the carâs headrest, installed onto a Brodit headrest mount. This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick charge). Item no: 521977 EAN: 7320285219779 Item no 521977 fits: Apple iPad Air 2019 (For all countries) Apple iPad Air 3rd Gen (A2123, A2152, A2153, A2154) (For all countries) Apple iPad Pro 10.5 (A1701, A1709) (For all countries) Geschikt voor: Actief Sig-plug Apple iPad Air Apple iPad Air 3rd Gen Pro 10.5 Montage: Swivelmount Garantie: 2 jaar apparaat: iPad Geschikt voor : 0.