Link ECU G4+ Xtreme

G4+ Xtreme ECUThe Link G4+ Xtreme ECU is Link’s most powerful engine management system ever. It equals or betters any ECU on the market. Whatever the application, the G4+ Xtreme ECU’s advanced configuration enables today’s complex engines to be optimised.Flexible options over the control of inputs and outputs allow the user to design their own functions to control all sorts of devices.Precise control of injectors and ignition angle are guaranteed at very low or high RPM or manifold pressures. A very high level of protection from interference and tolerance of trigger input errors has been built into this ECU, ensuring a smooth running engine even under the most demanding conditions.8 x fuel & ignition. Requires “A” & “B” Looms.Shipped locked and must be enabled before use. This increases security of shipping and provides information on when an ECU is first used for warranty purposes.The G4+ Xtreme (black) offers the ultimate in engine management.Link G4+ Xtreme ECU FeaturesA beautiful new robust metal enclosureIntegrated mounting bracket that is invisible once mounted (easily unclipped with release holes)Eight peak and hold injection, user definable, 10 amp peak, 3 amp holdMixture map, closed loop fuel correction. Automatic control via two O2 sensorsOBDII compatibilityECU Upgrades Are Now IncludedE-throttle. Previously an upgrade for the red Xtreme e-throttle is now standard in the G4+ Xtreme black ECU. Use any e-throttle and pedal combination. Fully programmable e-throttle control complete with gear shift control and throttle blipsKnock. Internal digital knock “windowing”. Detects knock using factory or after market knock sensorsLogging. Was 15 channels, now 100 channels of logging includedCAN. Now user defined and supports two independent CAN modulesTraction Control. Controlled tyre slip to improve vehicle safety, driveability and performanceECU HardwareEight saturated injection drives, eight ignition outputs, 11 analog volt inputs, 10 digital inputs, 10 auxiliary outputs *Four temperature inputsTwo, thirty four pin, waterproof connectorsExternal, 3, 4, 5 or 7 bar, MAP sensor (sold separately)CAN / RS232 portNOTE: Requires both looms A and B!